Thanks alot for your help! i will try them
Beiträge von Dk-dda
-
-
Hi
I am stock on mounting my new Vape ignition. This one:
http://www.akf-shop.de/shop/pr…plett-S51-S50-TUNING.htmlI need a new diagram that shows me how to connect my new parts with my standard components. My main-problem is, that the ignition light switch (Zündlichtschalter), isn\'t the same as the one that followed with the ignition.
I hope someone can help me here. Thanks.
/Dennis
EDIT:
If i could get this diagram with some colors or more numbers it would be great:
http://mza-vertrieb.de/main/Te…ce/pdf/Umruestsatz12V.pdf -
ZitatAlles anzeigen
Original von Mac Heba:
Hi, (Mahlzeit!)-\"Abblendscheinwerfer (mit H7-Einsatz)\" = Low Beam Headlamp with H7 socket
-\"Fernscheinwerfer (mit H4-Einsatz und Standlicht)\" = High Beam Headlamp with H4 socket and park light.IMHO the H4 lamps usually have 2 filaments for both high and low beam in one bulb, while H7 lamps only have one. So with H4 you should be good to go in any case.
GlückAuf!
Mac Heba
That\'s just perfect! Thanks alot
-
ben.pu:
Great. Thanks
Just one last question. What does this means?:
\"-Abblendscheinwerfer (mit H7-Einsatz)
-Fernscheinwerfer (mit H4-Einsatz und Standlicht)\"Cause it will be okay for me, only to drive with the \"short light\" ( what is it called? ). I have found some H4 35W halogen bulbs. So if the \"short light\", is for the H4 bulbs, it would be perfect.
-
Mac Heba:
Thanks alot for the great information. I appreciate that
PUNKS!!!:
Also thanks to you. But i still have one question.The H4 bulbs are 60/55watt. Would my ignition be able to deliver that much power? I use this:
http://s40205778.shoplite.de/s…sh=3B%2BS53%2B=2832353=29 -
Hi people.
I have finally found some H7 35Watt bulbs, but they are for xenon light. Now i don\'t know if i can use them on this headlight?
Headlight:
http://www.akf-shop.de/shop/pr…ERFER-chrom--Bullet-.htmlBulbs:
http://global.ebay.com/gbh/viItem?ItemId=330215125614Would it work, or should i work out something else?
/Dennis
-
Zitat
Original von tacharo:
The rims are for back and front.Thanks alot
-
Hi people.
I am going to buy some new rims for my Simson S53. But i just became confused. So now i ask you guys, can i for an example use the front rim on the backside? i mean, do i have to buy different rims, or can i just buy two of the same?
I have in my mind to buy this, but will it mach both in front and the back?
http://www.akf-shop.de/shop/pr…enrad-komplett-CHROM.html/Dennis
-
Okay, i will try that. Thank you.
-
Zitat
Original von Unleashed KR:
hmm with Schmiermaxe you could have problems.
were you not the one with Langtuning to Denmark?Why could i get problems with Schmiermaxe? And yes, it was me. But i did never find out if they deliver to Denmark. They aren\'t answering my e-mails.
-
Hi Simsonforum.
Finally i have got enough money for a new engine and exhaust for my Simson S53. But before i order the parts, i want to make sure that they will match my moped.
I have in my mind to buy those parts:
http://www.schmiermaxe.net/sho…g_auspuffanlagen_s_70.htm
http://www.schmiermaxe.net/sho…toren_komplettmotoren.htmPlease tell me, can i use it on my S53, and how is the quality?
/Dennis
-
ZitatAlles anzeigen
Original von Butcherbird:
first off: nice to know that simson´s are in denmark too.2nd: if you want a 60ccm you usually don´t have to reinforce the frame
with suspensions. if the engine get´s much stronger you should think aobut.brakes (by 60ccm) usually not too. ( i personally would aquire the sport- brakes from AKF.) look at there:
working pretty good on my bike.
as far as i know (berichtigt mich wenn´s falsch ist) is your moped the follower of the S 51 and they should have nothing changed on the build-up.
exacly the same was the S 70 with 70ccm. just an S 51 with more power.ok... so far, so good.
if you have any further questions just ask.
hope i could help you.
if i made a mistake the other users will tell me and you.
Thank you. You have been a great help too